HP ProCurve CLI CheatSheet

@http://blog.petrilopia.net/info/hp-procurve-cli-cheatsheet-2/

HP ProCurve CLI CheatSheet

LOG
log Display log events (most recent last)
log -r Display log events (most recent first)
log A12 Display log events of port a12
log A12 -r Display log events of port a12 (most recent first)
log 192.168.0.1 Display log events of 192.168.0.1

 

MAC
show mac A5 Show MAC-address of the device on port A5
show mac A4-A6 Show MAC-adresss of the devices on ports between A4 and A6
show mac 00112233-445566 Show which port device with MAC-address 00112233-445566 is connected

 

VLAN
show vlan Show information about vlans on this swtich
show vlan ports A19 Show VLAN ID and status of specific ports (A19)
show vlan Show ports on this vlan and port status
configure
vlan 19 Set switch to vlan 19
name SupportVLAN Name this vlan as “SupportVLAN”
tag A12 Set port a12 as tagged on vlan 19 (First do vlan <19>)
tag A12,A13 Set ports a12 and 13 tagged on vlan 19 (First do vlan <19>)
untag A12 Set port a12 as untagged on vlan 19
vlan 19 tagged A12 Set port a12 as tagged on vlan 19
vlan 19 untagged A12 Set port a12 as untagged on vlan 19
vlan 19 untagged A12-A20 Set port a12-a20 as untagged on vlan 19
no vlan 30 Remove vlan setting on port 30

 

FLASH
show flash Displays info about flash (version etc.)
copy running-config tftp filename.txt Copy your running config to file filename.txt at tftp server which IP is .
copy tftp startup 192.168.0.2 hp_2524 Copy your config (filename hp2524) from server 192.168.0.2 via tftp to switch
copy tftp flash file.swi Download and update your flash with file.swi from tftp server at

 

MISC
copy flash flash secondary Copy software from primary to secondary image is not intuitive
copy flash flash primary Updated secondary image first then You could copy from secondary to primary
hostname poro_1 Set switch hostname as poro_1
link-test 00112233-445566 Test connectivity between switches (this switch and 00112233-445566)
show run Show running config
password operator Set operator password (Normal user / read-only )
password manager Set manager password (Admin user / read-write)
password all Set operator and manager password
enable Switch to manager lever from operator level
ping 192.168.0.1 Ping IP 192.168.0.1
chassislocate Turn on/off switch locator led or blink it (30 minutes)
chassislocate blink 10 Blink switch locator led 10 minutes
ntp1 first.timeserver.net Add first.timeserver.net to NTP server list
timesync ntp Enable NTP syncronization with servers

 

PROMPT
Switch# Manager prompt
Switch>_ Operator prompt

 

Leave a Reply

Your email address will not be published. Required fields are marked *